Electric window ECU

The haynes manual shows it in the wiring diagram, but I can't seem to find where it's located, any one know? or have a good guess?
I am having trouble with my rear windows, they seem to work fine every 3rd or 4th time I get in the car, and either both work or both don't, I have never not been able to put them up...
Thanks,

It is behind the glove box!

Common problem - one of the joints on the circuit board cracks. Takes about 30 mins to fix.

check

discoweb.org -- - "Tech" section

If I remember correctly, there is a page that tells you step by step how to fix it.

Matt

Thanks I will break out the iron tomorrow!

Ah cheers nice post mmaddock, I'm having a similar problem to RGT, will post back if it dosent work.

That nailed it, one bad solder joint and it's as good as new. The job was easy enough with your guidance, though I made it harder than it had to be by removing the ecu box from the car instead of just sliding out the circuit board....

RGT said:

though I made it harder than it had to be by removing the ecu box from the car instead of just sliding out the circuit board....

Click to expand...

LOL - tried to do exactly the same thing myself until I realise the board came out! I should have mentioned that one, sorry.

Matt