electical issues after engine fixed p38 1996

hello
after i had engine repaired, i had many electrical issues in my p38 1996
the lcd display on my dashboard is turned off
i changed the starter , after none responding
the abs modulator didn't work, so i have the 3 lights on on the dashboard
and i got the battery sign on , on the dashboard, then it went away.
what do you think?
thank you all ..

Sounds like you need nanocom on it. Failing that, check battery, connections, fuse box and all earth points.

Wazzajnr said:

Sounds like you need nanocom on it. Failing that, check battery, connections, fuse box and all earth points.

Click to expand...

what's a nanocom?

Diagnostic kit from black box solutions. Best investment by far for a p38

dash display could be turned off on the indicator stalk, and as said check all electrical connections if you clean them do not use wd40 use a electrical contact cleaner.

Work through these: http://www.rangerovers.net/forum/7-...38/28663-info-electrical-troubleshooting.html

Grrrrrr said:

Work through these: http://www.rangerovers.net/forum/7-...38/28663-info-electrical-troubleshooting.html

Click to expand...

thank you for your reply

brianp38dse said:

dash display could be turned off on the indicator stalk, and as said check all electrical connections if you clean them do not use wd40 use a electrical contact cleaner.

Click to expand...

hi
if so, how to turn it on again?
thank you

Little rocker on top on indicator stalk move over to right to bring brightness up

brianp38dse said:

Little rocker on top on indicator stalk move over to right to bring brightness up

Click to expand...

yes .. i know about that.. but i'm talking about the lcd light

That has little bulbs in the back, they may be blown mine did that I thought the display had gone when it was just bulbs.

brianp38dse said:

That has little bulbs in the back, they may be blown mine did that I thought the display had gone when it was just bulbs.

Click to expand...

hope so.. thank you