egr blanking

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
gonna do mine tommorow too mate i got a blanking plate off ebay going to slip that between the two flages and bolt the valve back on top..did think about trimming up a bit of waste metal but took the lazy option
 
I have just done an egr removal about 10 mins ago, bought a kit from ebay and removed the whole pile of crap, going for a test drive in a minute but lookign at the design on mine not only did it dump dirty spent air into the air flow it also curtailed the turbo air with a big butterfly valve, what a pile of s**t all gone now nice clean air and great air flow.
 
The kit I used had rubber blanks for the egr control block, although I imagine small screws / silicone etc would do the job...I haven't experienced any problems at all, much improved on acceleration, overrun and economy. (Td5)
 
paul fletcher said:
The kit I used had rubber blanks for the egr control block, although I imagine small screws / silicone etc would do the job...I haven't experienced any problems at all, much improved on acceleration, overrun and economy. (Td5)
Click to expand...


only just did mine so no idea yet, was excpeting better air flow but what sort of eco improment are you seeing?
 
I did this ona 300tdi a few moths ago, I just unbolted the egr, used the gasket as a template and made my own and slipped it between the egr and manifold. Job done. Give the intercooler a good clean aswell, it will be full of ****, and that's when you'll notice the difference.
 
brainboy81 said:
only just did mine so no idea yet, was excpeting better air flow but what sort of eco improment are you seeing?
Click to expand...

Overall I reckon a couple of mpg extra, I expect this to improve once I get round to cleaning out my I/C and inlet manifold. I was gutted when I saw the amount of ****e in the egr. Although I will be soaking it in paraffin and sticking it on ebay though :D
 
paul fletcher said:
Overall I reckon a couple of mpg extra, I expect this to improve once I get round to cleaning out my I/C and inlet manifold. I was gutted when I saw the amount of ****e in the egr. Although I will be soaking it in paraffin and sticking it on ebay though :D
Click to expand...

you mena stick it on ebay with an advert like

if you want a decease in performance, fuel ecomony and general well running then buy this peice of s**t and bolt it on your engine. Maybe the yanks will buy it!!
 
brainboy81 said:
you mena stick it on ebay with an advert like

if you want a decease in performance, fuel ecomony and general well running then buy this peice of s**t and bolt it on your engine. Maybe the yanks will buy it!!
Click to expand...

Lets face it, with the ****e that gets sold on ebay there's gotta be SOMEONE out there with

1. A Td5 with a duff EGR
2. No clue
3. A paypal account.

Oh, and it's free listing this sunday :D
 
paul fletcher said:
Lets face it, with the ****e that gets sold on ebay there's gotta be SOMEONE out there with

1. A Td5 with a duff EGR
2. No clue
3. A paypal account.

Oh, and it's free listing this sunday :D
Click to expand...

good idea think i will stick mine up as well, got nothing to loose just baouts to go and test drive mine now since the mod.
 
You must log in or register to reply here.

Similar threads

M
EGR Valve-
Replies
6
Views
1K
MikeCBT
M
S
Freelander 2 Rough Idle and Cutting out After EGR replacement
Replies
3
Views
510
stevelincs
S
C
Help needed looking to by my first landrover
2 3
Replies
51
Views
875
cf1388
C
M
Freelander 2 (LR2) Freelander 2 2007 P042e EGR
Replies
6
Views
1K
Nodge68
Nodge68
Spridget
TDV6 EGR valve and exhaust temperature senders
Replies
6
Views
1K
Spridget
Spridget
Back
Top