Easiest way to get to the 10AS module?!?

Hi all

Next job on my list is to sort some central locking issues. What's the easiest way to access the 10AS module? I need to remove it completely to solder a relay on the board.

Cheers in advance and sorry if it's been explained before, my search didn't show anything specific

2001 90

Ta

If you remove the clock binnacle you can get to it that way, still awkward, think I used a stubby screwdriver.

aaronmorris said:

If you remove the clock binnacle you can get to it that way, still awkward, think I used a stubby screwdriver.

Click to expand...

Ok ta, I will go and see how the binnacle comes off

Snap!

On the binnicle theres 4 screws. 2 at the top on either side and two at the bottom either side.

Whole thing comes off, just watch the cables going to your gauges. Modual is down below, awkward to get to!

Let me know how you get on, got to do this myself as well!

huffhuff,
Also take your radio speaker out by using the two apertures (binnacle and speaker) it makes the job easier.

Tim4x4 said:

huffhuff,
Also take your radio speaker out by using the two apertures (binnacle and speaker) it makes the job easier.

Click to expand...

I don't have a speaker there

huffhuff said:

I don't have a speaker there

Click to expand...

Sorry huffhuff my speakers are low down on the dash and it gave me good access to the wiring on the 10AS module.

Tim4x4 said:

Sorry huffhuff my speakers are low down on the dash and it gave me good access to the wiring on the 10AS module.View attachment 92113

Click to expand...

Damn it.

Mine are above my head unfortunately so not great access

Thank you anyway

Pics? I thought all fenders had speakers there? Espexially TD5

Not all early td5's had them, probably spec dependent.

aaronmorris said:

Not all early td5's had them, probably spec dependent.

Click to expand...

Mines a 2001 so that's early I think. I don't have holes for them or nuffink.

I have one each side in the headlining. Will take a pic later as it's actually quite a good place for them. When I get further down my todo list to 'audio upgrade', I'll be adding another set above the rear windows either side of back door and a slimline sub in somewhere