Eas

Digel · Jul 15, 2011

Hi All
Can anyone advise the best values/Ride heights for the EAS when re Calibrating after yet another fault (lazy censor). I'm using my laptop and a program and cable I bought. It does the trick but I'm not sure of the best values to enter when I re Calibrate.

Nigel

Irishrover · Jul 15, 2011

Do a search for EAS values on the forum. The subject has already been covered.
They are approximate values and should get you in the ballpark.
Did you not save your old values before you started ???

gfromleeds · Jul 15, 2011

Every cars different I'm afraid
Its just trial and error on a level ground with a tape measure and alot of time

discomalc · Jul 16, 2011

As Irish says the values in the SW will differ it reads the angle of the ride height sensor. you need to measure wheel centre to wheel arch distances and adjust accordingly. They have been posted on here numerous times, do a search.

Eas

Digel

Member

Irishrover

Well-Known Member

gfromleeds

Well-Known Member

discomalc

New Member

Similar threads