Eas Still not connecting

Big vee · Dec 28, 2012

Hi all At my wits end now still no comm with eas , how can i check if obd socket is ok or anything else i can check
regards
Verne
:crazy_driver:

phattdude · Dec 28, 2012

Morning, blackbox solutions do a tool for the EAS system that plugs into the socket on the passenger side, don't know if this is what you need https://blackbox-solutions.com/shop/ eas kicker

Saint.V8 · Dec 28, 2012

Take the dash panel off and check the obd connection wiring....they suffer corrosion quite badly

marcinbrighton · Dec 28, 2012

Are any other ECU's connecting? What diagnostics are you using?

Datatek · Dec 28, 2012

Big vee said:
Hi all At my wits end now still no comm with eas , how can i check if obd socket is ok or anything else i can check
regards
Verne
:crazy_driver:

So, tell us if you are using the EAS software from RSW, if so, I assume you are also using a USB to serial adaptor or a USB lead fom Ebay? If you are and are using Vista it may well be a driver problem for the USB.

Big vee · Dec 28, 2012

Hello no cable is from you Datatek i am getting a old lap top tomorrow running xp pro so fingers crossed it works . will be using the rsw software

Datatek · Dec 28, 2012

Big vee said:
Hello no cable is from you Datatek i am getting a old lap top tomorrow running xp pro so fingers crossed it works . will be using the rsw software

Oops, can never remember who has one of mine. Most likely it's a problem with the USB drivers.
Make sure you have the correct driver for the USB to serial adaptor loaded before you plug the adaptor into the PC.

ovalandrover · Dec 30, 2012

check 5 amp fuse under bonnet

Big vee · Dec 30, 2012

hopeing for a dry day so will be out there Sunday to try again

Eas Still not connecting

Big vee

Active Member

phattdude

New Member

Saint.V8

Dyed-in-the-wool 100% RR Junkie

marcinbrighton

New Member

Datatek

Well-Known Member

Big vee

Active Member

Datatek

Well-Known Member

ovalandrover

Well-Known Member

Big vee

Active Member

Similar threads