EAS relay live feed

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
L

Landroverscott

Member
Posts
16
Location
Scotland
I have disabled my EAS self-levelling by replacing the delay relay (ANR4652) with a 4-pin relay. Could someone tell me which colour wire to the relay is the live one, as I want to instal a switch to sometimes completely disable the system?
 
Given that the car is parked for static leak tracing, just unplug the relay. Then once that's done put the relay back, and do live leak tracing with engine running. In the latter case you're looking for leaks during normal operation.

Better still do the valve block on on the bench. That way you can check the valves under the block as well.
 
pwood999 said:
Given that the car is parked for static leak tracing, just unplug the relay. Then once that's done put the relay back, and do live leak tracing with engine running. In the latter case you're looking for leaks during normal operation.

Better still do the valve block on on the bench. That way you can check the valves under the block as well.
Click to expand...
👍🙏
 
You must log in or register to reply here.

Similar threads

P
Voltage reading in ground cable(s)
Replies
2
Views
494
patrickr90
P
S
wiper park switch: why does it connect to earth
Replies
9
Views
3K
ANK84
A
cappers
Shorted the ignition switch feed!
Replies
7
Views
1K
miktdish
miktdish
Y
Another series III brake fail wiring harness question.
Replies
7
Views
2K
steve2286w
steve2286w
I
Not again .... headlights 62 plat puma 110
Replies
1
Views
1K
iainmaoileoin
I
Back
Top