Mamasbigtruck
Member
- Posts
- 77
- Location
- West Sussex
Hi All
Been a while since i've been here, due mainly to splitting up and giving wife the Rangie.
But i've got back involved with it temporarily, Recently it showed soft fault when she was driving to work, then on the way home hit hard fault and she drove the last 3 miles or so fully deflated. I found the pump had no output pulled it apart and the piston bearing had failed which also scored up the piston and ruined the seal.
Replaced the piston liner and seal and tested ok but i cannot rest the fault
Using EASunlock it seems to communicate as I can power pump on and off, I have had the fault reset but only when engine running, pump kicked in lights on dash went to normal but it just faulted again.
So either it gets taken by scrap man, a manual spring kit (anyone here got a used one going cheap) or need some idea where I'm going wrong
Thanks in advance
Been a while since i've been here, due mainly to splitting up and giving wife the Rangie.
But i've got back involved with it temporarily, Recently it showed soft fault when she was driving to work, then on the way home hit hard fault and she drove the last 3 miles or so fully deflated. I found the pump had no output pulled it apart and the piston bearing had failed which also scored up the piston and ruined the seal.
Replaced the piston liner and seal and tested ok but i cannot rest the fault
Using EASunlock it seems to communicate as I can power pump on and off, I have had the fault reset but only when engine running, pump kicked in lights on dash went to normal but it just faulted again.
So either it gets taken by scrap man, a manual spring kit (anyone here got a used one going cheap) or need some idea where I'm going wrong
Thanks in advance