eas problem

T

thomas tiernan

New Member

Posts

79

Location

colchester,essex

• May 3, 2009

• #1

hi all,went out to my p38 this morning and it was sat on its bump stops, this has never happened before in 2 years of ownership. no faults are showing, compressor is sucking in air like a good en,checked all fuses checked all height sensor multi plugs. when u drive it, it tells me I'm in standard ride height,i can flick through all the height settings but nothing happens. i done a 200 mile round trip in it yesterday and it worked faultlessly, I'm pulling my hair out has anyone any ideas as i'm stumped! thank you,tom.

 

T

thomas tiernan

New Member

Posts

79

Location

colchester,essex

• May 3, 2009

• #2

i have also noticed that there is a constant stream of air coming out of the exhaust valve when i take the filter of,any ideas?

 

Datatek

Well-Known Member

Posts

45,018

Location

Near Poitiers SW France

• May 3, 2009

• #3

thomas tiernan said:

i have also noticed that there is a constant stream of air coming out of the exhaust valve when i take the filter of,any ideas?

Click to expand...

Sounds like a stuck valve or a EAS ECU problem. Someone with more experience will no doubt have a better idea.

 

E

eightinavee

Well-Known Member

Posts

3,956

Location

UK.

• May 3, 2009

• #4

The diaphram rubber has failed in the end of the valve block,you need kit part # STC1803 about £40 + Vat retail,easy to fit after taking the compressor and valve block out of the box.

 

T

thomas tiernan

New Member

Posts

79

Location

colchester,essex

• May 3, 2009

• #5

thanks mate, will be takeing it apart in the morning, dont you just love p38s !!!!