P38A eas not level

kermit_rr · Oct 4, 2020

Because i could see the car was obviously not level, with the front left being higher than when i parked and the others being different states of lower, i plugged the nano in..

I then set to standard height via nano and once it had finished leveling..

Eventually it changed to dormant status, but rear left valve still showed as open and i saw the following height readings..

I'm confused as is the landy! Any ideas what's going on?

Henry_b · Oct 4, 2020

Calibrate it.

If she's on the píss

kermit_rr · Oct 4, 2020

Henry_b said:
Calibrate it.

If she's on the píss

I have! And it wasn't like that when i parked it!

kermit_rr · Oct 4, 2020

I don't see how the front left could increase in height overnight

pete12345 · Oct 4, 2020

Are you sure the back hasn’t sunk one side

Grrrrrr · Oct 5, 2020

kermit_rr said:
I don't see how the front left could increase in height overnight

Didn't @pwood999 have something like that recently?

kermit_rr · Oct 5, 2020

Grrrrrr said:
Didn't @pwood999 have something like that recently?

Must have missed it

Grrrrrr · Oct 6, 2020

kermit_rr said:
Must have missed it

Pretty sure he had something lifting overnight and traced to a leaking exhaust valve.

kermit_rr · Oct 6, 2020

Grrrrrr said:
Pretty sure he had something lifting overnight and traced to a leaking exhaust valve.

Could be. Not done it since!!
One valve showing as open while in dormant state was odd though! And no error codes

Grrrrrr · Oct 6, 2020

kermit_rr said:
Could be. Not done it since!!
One valve showing as open while in dormant state was odd though! And no error codes

Don't recall seeing that, to be honest. I'll have to get the Nanocom out and have a play at some stage.

kermit_rr · Oct 6, 2020

Grrrrrr said:
Don't recall seeing that, to be honest. I'll have to get the Nanocom out and have a play at some stage.

I forgot to take a pic

Grrrrrr · Oct 7, 2020

kermit_rr said:
I forgot to take a pic

It is starting to ring bells now but maybe it is your pics above. Fortunately I have not needed the Nanocom in ages.

pwood999 · Oct 7, 2020

Grrrrrr said:
Didn't @pwood999 have something like that recently?

Mine was rising at the rear. Eventually traced it to a combination of weak Inlet & Corner valve springs, plus valve plunger rubber faces gone hard because they're 20 years old. New set from Kurt has helped a lot. Still not perfect but useable and good enough to now need messing with.

P38A eas not level

kermit_rr

Very

Henry_b

Think outside, no box required.

kermit_rr

Very

kermit_rr

Very

pete12345

Well-Known Member

Grrrrrr

Technician, Bodgit & Scarper Ltd

kermit_rr

Very

Grrrrrr

Technician, Bodgit & Scarper Ltd

kermit_rr

Very

Grrrrrr

Technician, Bodgit & Scarper Ltd

kermit_rr

Very

Grrrrrr

Technician, Bodgit & Scarper Ltd

pwood999

Well-Known Member

Similar threads