EAS Issue Not Compressor or Bags tho

Hi all
Right EAS not working on my 95 SE, pump is all good & has brand new bags/battery etc. All fuses checked along with relay for EAS & that's all fine I have also checked power to the EAS relay & that's all good, but on checking power to the actual compressor (2 heavy gauge & 1 light gauge) there is nothing getting through. Is there another relay/fuse somewhere I don't know about? If not can someone please pass on any info if they have any? I have checked the common asked questions etc but can't seem to find anything on a fault like this. Could the level switch be faulty or something?
Any help greatly appreciated as she is currently stuck on my drive on bump stops
Cheers

Look in technical section ,I believe there is a thermal switch which sometimes fails

Its now called the technical archive top left range rover home page look for Wammers post checking eas compressor.
here you go, https://www.landyzone.co.uk/land-rover/checking-eas-compressor-and-diaphragm-valve.172555/

Cheers guys, although I thought the Thermal Switch was internal to the compressor & the compressor works fine, i just don't have power going through to the compressor, it goes to the relay fine but nothing to start the compressor, but i'll check for Wammers & that thead, thank you

I might be wrong but if EAS has gone into hard fault the pump will not run until fault is cleared.

Thanks buddy