P38A EAS faults

radford19 said:

Thanks for all your help and advice, I think that I am getting to grips with it now. Found your tech advice page and followed what it tells me. I did the compressor checks and it is weaker than a pump for pumping up a child's air bed. Hold it about and inch from my face and all I can feel is a gentle breeze, no problem holding my finger over the outlet. When I disconnected the blue pipe there was no air to escape.

So it's a new compressor then? I see that it has been rebuilt once already so I feel that maybe it wouldn't be wise to do it again.

Click to expand...

Grrrrrr said:

Depends. Reckon he it can take 2 or 3 refurbs as long as it isn't vibrating madly or making nasty noises. You need the teflon seal and cylinder kit. Otherwise have a word with @kurtjohnson10 and see if he has one kicking about he can let go.

Click to expand...

kurtjohnson10 said:

I have a brand new one for sale, just let me know if you need one

Click to expand...

radford19 said:

What sort of cost are we looking at?

Click to expand...

pete12345 said:

That kit that datatec supplies is always useful for future problems and you will probably need it in the future

Click to expand...

Datatek said:

Win 7 is fine, doesn't matter how old the laptop is, best if it has a serial port, if not a USB to serial adaptor will be needed.
A 2 metre EAS cable for the P38 allowing you to work outside the car, necessary when calibrating the heights, together with a CD containing the EAS software, EAS PDF, my Airbag Replacement Guide and a copy of RAVE covering P38, Defender and early L322 is £13.50 plus £6.00 P&P total £19.50 if you pay by cheque, or £21.00 if you want to use Paypal.
Cheques to:- K Howlett, Le Moulin de la Chauvaliere, 86190 Latille, France.
For Paypal it's:- [email protected]
It needs a Windows laptop and if the laptop does not have a serial port you will also need to buy a USB to RS232 serial adaptor, these can be found for £10 or less on Ebay. Make sure you get one with a full RS232 implementation and the correct drivers for your version of Windows and load the correct driver BEFORE you plug in the adaptor.
The software reads and clears all EAS faults, allows you to send the car to all the different heights for calibration, see the actual height sensor readings, force the compressor to operate and de pressurise all circuits.
I normally post next working day after payment is received and it usually takes 3 to 5 days for delivery.

Click to expand...

radford19 said:

I would like to get one from you, what do I need to do for you to send me one?

Click to expand...

radford19 said:

I would like to get one from you, what do I need to do for you to send me one?

Click to expand...

Datatek said:

Pay me, either by PayPal to [email protected] or UK sterling cheque posted to me. I f you want to pay by cheque, let me know and I will send you a PM with details.
Don't forget, you need a windows laptop to run the software, and if the laptop does not have a serial data port, you will need a USB to RS232 serial adaptor costing about £10.
This is ONLY for the P38 EAS.

Click to expand...

radford19 said:

Just to confirm then, £21 by PayPal?

Click to expand...

radford19 said:

I have sent £21 via PayPal for the EAS Code Reader.

Please send to:
I live in the UK!!

Click to expand...