P38A EAS compressor Thermal Switch

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

pwood999

Well-Known Member
Full Member
Posts
3,961
Location
Near Heathrow.
Recently ordered some replacement thermal switches for the pumps I have on the bench. Looking through all my pumps, it seems some have 125degC and others have either 100deg or 120deg. Also got a message from the eBay seller I used that 120deg are cheaper from the supplier than 100deg for some reason ?

One day I will check the actual pump temps after a decent run, but what do others think ?

Pete
 
Recently ordered some replacement thermal switches for the pumps I have on the bench. Looking through all my pumps, it seems some have 125degC and others have either 100deg or 120deg. Also got a message from the eBay seller I used that 120deg are cheaper from the supplier than 100deg for some reason ?

One day I will check the actual pump temps after a decent run, but what do others think ?

Pete
120C sounds OK to me but I have never had cause to replace the thermal switch
 
Back
Top