tomtomtom
Active Member
- Posts
- 240
- Location
- Evesham, Worcestershire
Right-ho,
Today I tried to remove the front wings on the new 59er, but did I have any luck? Did I heck!
The 4 bolts that run down the wing and screw into the bulkhead pillar just seem to spin all day long. On my 1960, I have bolts that have a very wide thread and as such, never sieze and are easy to remove. Think they are either 9/16 or 5/8 head.
The others on my 59 are 1/2" heads and appear to just be nuts with the threaded bolt comin from inside the pillar box section. How are you supposed to undo these if they spin?
Any fab ideas guys?
Thanks
Tom
Today I tried to remove the front wings on the new 59er, but did I have any luck? Did I heck!
The 4 bolts that run down the wing and screw into the bulkhead pillar just seem to spin all day long. On my 1960, I have bolts that have a very wide thread and as such, never sieze and are easy to remove. Think they are either 9/16 or 5/8 head.
The others on my 59 are 1/2" heads and appear to just be nuts with the threaded bolt comin from inside the pillar box section. How are you supposed to undo these if they spin?
Any fab ideas guys?
Thanks
Tom