tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
P38A Duchess is in the garage!
- Thread starter Flossie
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
RangeRoller dt
Well-Sprung Member
- Posts
- 14,258
- Location
- Trapped inside my head @ LZ asylum
It’s an early DT so it shouldn't have things like hevac, fog lights, etc but it does. No CC or MPG crap or TC fitted thought they were standard on later models?
Flossie
Well-Known Member
- Posts
- 10,623
- Location
- Shropshire
I'll nip out and have a press, see if mine move, I've got cruise.
RangeRoller dt
Well-Sprung Member
- Posts
- 14,258
- Location
- Trapped inside my head @ LZ asylum
If you have CC then the buttons are there. Sounds like your stalk is ******
Flossie
Well-Known Member
- Posts
- 10,623
- Location
- Shropshire
mine's a diesel and has the two buttons,if you press the wrong one you set the speed alarm,sh1t myself when it won't off the first time as I inadvertently set it for 30mph.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Flossie
Well-Known Member
- Posts
- 10,623
- Location
- Shropshire
I've got the buttons.
Shall have a play tomorrow morning and see if they work.
.Shall have a play tomorrow morning and see if they work.
Flossie
Well-Known Member
- Posts
- 10,623
- Location
- Shropshire
Yay! They work.
20.1 mpg aroond toon...
.20.1 mpg aroond toon...
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Flossie
Well-Known Member
- Posts
- 10,623
- Location
- Shropshire
Datatek
Well-Known Member
- Posts
- 43,912
- Location
- Near Poitiers SW France
If you replace the stalk with one that has the buttons that operate, you will get MPG, range remaining etc. The only caveat is that if you have a Lo line BECM it may not work, it certainly works on the Hi line BECM.
RangeRoller dt
Well-Sprung Member
- Posts
- 14,258
- Location
- Trapped inside my head @ LZ asylum
Initially I thought I should have a low line becm, but I have things that a hi line one is needed for? Either it’s a hi line one or quite a bit has been bodged in somehow
Datatek
Well-Known Member
- Posts
- 43,912
- Location
- Near Poitiers SW France
A stalk from a breaker costs little and it's a straight swap, the connector is there behind the plastics.Initially I thought I should have a low line becm, but I have things that a hi line one is needed for? Either it’s a hi line one or quite a bit has been bodged in somehow
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Post#397.
