P38A Driver`s door will not open and windows will not open

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Rover9676 said:
Duly Noted!! I've never soldered before, so it will be interesting. While I'm waiting on the parts it's a good time to make other repairs (Inside Bonnet Release and it's sticky latches) and forum research.
Jesse
Click to expand...
I took the door lock out of my year 99 LHD P38 today, I was surprised to find there are 2 connectors whereas the RHD from year 00 only has one. The lock and the connecting rods are all different between LHD & RHD, the plastic clip is also handed, red for LHD green for RHD the micro switch assembly is also handed.
 
Datatek said:
I took the door lock out of my year 99 LHD P38 today, I was surprised to find there are 2 connectors whereas the RHD from year 00 only has one. The lock and the connecting rods are all different between LHD & RHD, the plastic clip is also handed, red for LHD green for RHD the micro switch assembly is also handed.
Click to expand...
Long day! I received an email saying my items were dispatched today. But, they maybe shipping them to an incorrect address in the UK. If possible can you provide me with cn4x4sss contact information or send an email or give a call to ensure my correct address. I've tried but it seems impossible to email from the US. I checked the latch photo and it's a good match. Is so I'll send information in early in the morning, US Time.
Jesse
 
Rover9676 said:
Long day! I received an email saying my items were dispatched today. But, they maybe shipping them to an incorrect address in the UK. If possible can you provide me with cn4x4sss contact information or send an email or give a call to ensure my correct address. I've tried but it seems impossible to email from the US. I checked the latch photo and it's a good match. Is so I'll send information in early in the morning, US Time.
Jesse
Click to expand...
4.30am here but I'm up with acid reflux :(.
Found this for you.
Screenshot_20220909-042912_eBay.jpg
 
Flossie said:
Went to answer phone Jess but a recorded message says to send a text so I've done that. Fingers crossed :cool:
Click to expand...
Thanks Flossie. How do I send a PM?
Where in the Forum message board do I put a @ sign?
I went to Members search, typed your username "Flossie" and type my message. But I think the button choice was Reply To Post. I clicked on it to send.
 
Rover9676 said:
Thanks Flossie. How do I send a PM?
Where in the Forum message board do I put a @ sign?
I went to Members search, typed your username "Flossie" and type my message. But I think the button choice was Reply To Post. I clicked on it to send.
Click to expand...

If @Flossie and you are talking via PM click on the little envelope next to you username and the conversation should be there.
20F29D01-DC96-410D-AB6F-8E3B0346327D.jpeg

J
 
Flossie said:
He's just rung me(terrible line) but he says they have gone to the USA.
Hopefully that's good news :)
Click to expand...
Flossie, as you can tell I'm not good with PMs or understanding how to properly reply to posts. So I'll respond to an individual's post. Most of the time I'll respond to the last thread/post. I'll get better. Thanks for all the help and personal time you gave to help me with this matter. If any of you need assistance with something here in the US, just reach out to me.
Jesse
 
@Rover9676 sent it to my profile but I got it eventually. Have you seen my post above confirming its going to the USA?
It was a terrible line and the cell phone conversation I was having with cnss was almost impossible to hear. He did confirm that it's going to the USA though. The parcel will go to a global shipping center and I suspect its the UK address of that place that you have received. I also suspect that you will receive email updates from the carrier at various places it visits on its way to you.
 
Rover9676 said:
I just purchased both items from cn4x4sss, a breaker in the UK. The latch was for my year P38 and cost £45.00. The switch pack was £100.00. I wanted to get refurbished from Martnz UT I haven't got an email response. By the way Rimmer Brothers has Genuine MG Rover Front door-LH, Driver for £160.00 but wasn't sure if I should buy it. I asked Data but made mistake when I said they had an exact part number under MG for £51.00. Rimmers lists a Genuine Range Rover latch for $305.00 us dollars. What's your opinion?
Thanks
Click to expand...

If the part number was different it would probably have required some fettling. The plugs can be different. The motors and possibly the mechanism inside would probably be the same but it seems a shame butchering a brand new part. I would have done what you have. Data will know which microswitches are required. Yours should just pull out with no soldering required.
 
Flossie said:
@Rover9676 sent it to my profile but I got it eventually. Have you seen my post above confirming its going to the USA?
It was a terrible line and the cell phone conversation I was having with cnss was almost impossible to hear. He did confirm that it's going to the USA though. The parcel will go to a global shipping center and I suspect its the UK address of that place that you have received. I also suspect that you will receive email updates from the carrier at various places it visits on its way to you.
Click to expand...
I did! At first, I thought the message was being hijacked. Again many thanks and I'm going to work on PM and posting.
 
You must log in or register to reply here.

Similar threads

rangie1998
L322 Front doors deadlocked, do I have to break the locks?
Replies
1
Views
462
rangie1998
rangie1998
BunduRafiki
L322 Drivers door won't open from inside or outside
Replies
6
Views
428
marjon
marjon
ovalandrover
L322 Lift gate will not open Disco 3
Replies
13
Views
738
biketeacherdave
biketeacherdave
kurgan
Disco 1 Driver door lock and central locking issues.
Replies
8
Views
651
kurgan
kurgan
I
L322 alarm and keyfob issues
2
Replies
23
Views
2K
isamyku
I
Back
Top