Door seals

Im now getting near to re newing my door seals on my series 3. Upon inspection they appear to be in about 6 different parts and mine are riveted to the bodywork lip around the door. Is this the only option or in this modern age is there a one piece door seal that clips/pushes on? Im not confined to genuine land rover parts only so any advice/ideas and where to get the seals would be appreciated. thank you

i got mine from paddock spares they seam to be the cheapest i could find that do the all in one seal.
http://www.paddockspares.com/cfe102991-door-rubber-90-one-piece-seal-lh.html?___SID=U
http://www.paddockspares.com/cfe102991-door-rubber-90-one-piece-seal-lh.html?___SID=U

each links for the left and right side

I have the door seals from a peugeot 205 gti on mine the just pushed on just needed trimming to length

Worth a trip to a breakers yard ?

Ahh thanks all! Thats more like it! It just makes sence to have a 1 piece for ease of fitting and less chance of leaks!

I - it makes sense because unless you a hardcore restorer paying £50+ per door for the seperate seals aint worth it. when you can pay £15 for a one piece.

to add aswell in order to fit the one piece seals, you'll need to trim the lip around the door frame so that the seal can fit propperly, think it needs trimming to about 12-15mm
i did a trial an error (with the grinder) on the rear door to get it to fit.

Could just use dum dum. I'm going to use neoprene and tiger seal for mine