Right so mW door lock barrels are stuffed. So I buy new ones on fleebay and when I fit the first one it's too short and sits way inside the door handle. It also seems not to work too well either. Has anyone experienced this before? Or am I doing something wrong?
Door lock barrels for an 89 110.
- Thread starter Fran
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 11,020
- Location
- North of the Wall
Sounds like you haven't put the original end of the barrel on to the new barrel before slotting it back in the handle.
- Posts
- 11,020
- Location
- North of the Wall
Yeah, that's the one 
- Posts
- 11,020
- Location
- North of the Wall
Is this push button type?
Yes
- Posts
- 11,020
- Location
- North of the Wall
Then I can only think that the metal sleeve, inside the handle that the barrel slides in to, is broken. As far as I can remember there are no other bits.
gazman
Well-Known Member
- Posts
- 724
What age are the doors on your landy? I bought a lock set from eBay but it turned out they are for earlier landys than mine. Most lock sets on ebay are for 1980 to about 2001. The later sets are longer and slightly wider and I had to buy from my local indy.
Will get pics if required
Will get pics if required
Last edited:
