Door card mushrooms!

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Grrrrrr

Grrrrrr

Technician, Bodgit & Scarper Ltd
Posts
19,893
Location
Buckinghamshire, UK. ('95 DT)
My door-cards are missing most of the mushroom shaped bits of plastic that the plastic fastener studs attach to to hold them on. Has anyone come up with a nice workaround to replacing the mushroom parts?

Cheers,

J
 
I'm doing away with all mine and installing riv nuts into the door, but I'm not bothered about the resulting cap head bolts and washers that'll be on show.
 
They are so cheap to buy its almost not worth the effort of a work-around.

Here are some part nos:
MWC9134
EYC101460
 
As others have pointed out, plenty for sale on eBay for hardly any money at all, why bother with an alternative solution?

On a similar vein, and in a blatant thread hijack, does anyone know where you can purchase the colour coded "pegs" used to hold bits of trim on? I'm thinking the same sorts of things that hold the seat base in position, etc.
 
odysseus said:
As others have pointed out, plenty for sale on eBay for hardly any money at all, why bother with an alternative solution?

On a similar vein, and in a blatant thread hijack, does anyone know where you can purchase the colour coded "pegs" used to hold bits of trim on? I'm thinking the same sorts of things that hold the seat base in position, etc.
Click to expand...
Stufer was looking to make some of those IIRC....
 
odysseus said:
As others have pointed out, plenty for sale on eBay for hardly any money at all, why bother with an alternative solution?

On a similar vein, and in a blatant thread hijack, does anyone know where you can purchase the colour coded "pegs" used to hold bits of trim on? I'm thinking the same sorts of things that hold the seat base in position, etc.
Click to expand...

Check on ebay. I bought a pack of assorted sizes for a few quid.
 
MrGorsky said:
I got mine here...

20x Land Rover & Range Rover Interior Trim Panel & Door Card Fastener Clips | eBay

They are indistinguishable from the LR originals.
Click to expand...


Nope. Got loads of them. It is the bit on the door card they attach to that is causing the problem. They seem to be missing. They look a bit like the head of a mushroom stuck to a piece of very thin metal that is then embedded / stuck to the backing foam of the door. So, I have studs but nothing to attach them to.
 
Grrrrrr said:
Nope. Got loads of them. It is the bit on the door card they attach to that is causing the problem. They seem to be missing. They look a bit like the head of a mushroom stuck to a piece of very thin metal that is then embedded / stuck to the backing foam of the door. So, I have studs but nothing to attach them to.
Click to expand...

Part of door card and can't be obtained separately.
 
You must log in or register to reply here.

Similar threads

Lej
Door locks/latch assty and handles
Replies
0
Views
541
Lej
Lej
Maat
P38A Driver's door lock issues
Replies
12
Views
1K
Datatek
Datatek
dag019
Rear door check strap
Replies
14
Views
1K
dag019
dag019
Wilson90
Wolf Door Top parts
Replies
6
Views
1K
dag019
dag019
British Leyland Rover
Series 3 How to attach lower door cards to series door
Replies
7
Views
1K
steve2286w
steve2286w
Back
Top