does anybody know what the bearing numbers are in the rear diff of a td5 def

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

ROB1N

Member
Posts
99
Location
chepstow
Im going to rebuild the diffs on my defender so I would like to try and source the bearings cheers rob
and its a 90 built in 99
 
Last edited:
2x carrier bearing rtc3095 1 x pinion bearing 539707 1 x pinion bearing 539706 1 x seal ftc5258 , if you use timken bearings pinion height should remain correct ,set diff carriers bearings properly by adjusting all backlash just out with one bearing adjuster and putting 4-6 thou back with the other`
 
remove backlash with the adjuster on crownwheel side other must be loose , the adjust the other to put backlash back that means bearings are then correctlt preloaded and backlas is correct , bearing caps are sided so mark before removal
 
Back
Top