DIY EAS Reader ???

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Yes but not before some of the members got hold of it and I think one of them has built it using a PDA, need to read the whole thread
 
Tervueren said:
Yes but not before some of the members got hold of it and I think one of them has built it using a PDA, need to read the whole thread
Click to expand...


I did read the thread.

There's some C code and some examples of the code working in PDAs et al, but no schematic for the interface that was immediately obvious. Hence I tried to download the PDF.
 
I have downloaded it and it's on a CD.
It doesn't read or allow changes, only unlocks the fault message. If anyone requires the download, send me a PM and I will mail it on-it has been scanned for viruses and is clean. You will need an Adobe reader.
Sorry I have not been online much lately, I am slogging me guts out in our Sister plant in Singapore and will be here for the next couple of weeks and can't get much access to a PC to read all the posts.
 
You must log in or register to reply here.

Similar threads

JamesBB
P38A EAS again.
2 3
Replies
41
Views
2K
JamesBB
JamesBB
D
Nanocom in Preston Lancashire
Replies
19
Views
1K
Mark Piercy
Mark Piercy
D
Eas system holds air then drops after driving and turn off
2 3
Replies
47
Views
2K
Datatek
Datatek
S
Air to Springs
5 6 7
Replies
134
Views
5K
Rubberknees
Rubberknees
K
Is my RR Classic in EAS shutdown?
Replies
12
Views
1K
kevleaper
K
Back
Top