Disgiused me 'too short' wheelstuds

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

landowner

Pensioner Pete
Full Member
Posts
13,222
Location
WA2
Made me wheel studs look a bit more respectable today, and keeps em clean as well.:cool:

What do ya think, a bit gay maybe? bling bling?:D


before n after
 

Attachments

  • Landy 005.jpg
    Landy 005.jpg
    231.4 KB · Views: 219
  • S15 LTS 010.jpg
    S15 LTS 010.jpg
    36.1 KB · Views: 172
  • S15 LTS 009.jpg
    S15 LTS 009.jpg
    18.5 KB · Views: 171
Can't see what you've done? Painted em? They got caps on or something?

Looks alright to me anyway.
 
It's for stress relief, every time I'm stressed with the repairs I stick another plastic cap on, done six up to now, todays was because I cant get the bolts that hold me calipers on undone.
They're on the axle I took off and I've tried heat and a long bar on a socket and bashing the socket whilst pressure is applied.
I've tried a cold spray stuff ta freeze the bastards whilst I try and shock em loose.
I'm now officially fed up and leavin em till Monday:(
 
see...
told you you wanna buy mine :) mine are allready off.

If you want to mate ive got a complete axle you can have any bits off them.

So can anyone else for that matter.
Ta mate,

I have a set of calipers off the axle I bought but the pistons are corroded. The calipers on the axle I took off are Ok but I cant get em off to swap em to me new axle :doh:

If you have two good calipers for solid discs and the pistons are shiney then I might be able to afford them if they are not tooooooo expensive:)

it may be cheaper to buy new pistons an seals for these though:confused:
 
tell you what ill swap u 4 a V8.

I could prolly arrange delivery at cost though, ill go speak to that wonderful royal mail stuff :D

Cost about a tenner with parcelforce.

I'm gonna have a go with the grinder on Monday and see how it goes.

had to give up today , I was wiring a new security lamp on the garage and when I came to strip the wires back there was a blue flash and a bang and I dropped the soddin strippers:eek:
anyway, the qualified electrician who installed it wired the bloody switch in upside down so on was off and off was jeeeeesus me bloody thumbs on fire.:D
Didn't fall off the ladder though:cool:

and the light works:cool::)
 
Back
Top