Discovery TD5 immobilised HELP

J

john

Guest

• Jan 25, 2005

• #1

I was adding some new accessories to fuse no 6 the cigar lighter circuit ,
when I pulled the fuse the alarms went off and the engine is now
immobilised. I cant reset the system with either one of the 2 remote fobs I
have, I have tried the emergency key access, loads of times with 30min
breaks in between without success also i have tried the recognition sequence
for the key fob again.Any help would be greatly appreciated.

 

M

Mark C.

Guest

• Jan 26, 2005

• #2

Disconnect battery for 10 mins and try again. The amount of electronic
faults that works with is unreal!

Let me know if it worked.

MC

------


"john" <[email protected]> wrote in message
news:[email protected]...
> I was adding some new accessories to fuse no 6 the cigar lighter circuit ,
> when I pulled the fuse the alarms went off and the engine is now
> immobilised. I cant reset the system with either one of the 2 remote fobs
I
> have, I have tried the emergency key access, loads of times with 30min
> breaks in between without success also i have tried the recognition
sequence
> for the key fob again.Any help would be greatly appreciated.
>
>

 

M

Michael Driscoll

Guest

• Jan 26, 2005

• #3

Your vehicles engine ECU will need to be re-synchronised to the vehicle.
Contact any Autologic technician for this service

--
Michael Driscoll
Autologic-Diagnos
t +44 (0) 1491 614300
f +44 (0) 1491 614460
e [email protected]
web www.Autologic-Diagnos.com
"Mark C." <[email protected]> wrote in message
news:[email protected]...
> Disconnect battery for 10 mins and try again. The amount of electronic
> faults that works with is unreal!
>
> Let me know if it worked.
>
> MC
>
> ------
>
>
> "john" <[email protected]> wrote in message
> news:[email protected]...
> > I was adding some new accessories to fuse no 6 the cigar lighter circuit
,
> > when I pulled the fuse the alarms went off and the engine is now
> > immobilised. I cant reset the system with either one of the 2 remote
fobs
> I
> > have, I have tried the emergency key access, loads of times with 30min
> > breaks in between without success also i have tried the recognition
> sequence
> > for the key fob again.Any help would be greatly appreciated.
> >
> >
>
>

 

P

Peter R.

Guest

• Jan 27, 2005

• #4

On Tue, 25 Jan 2005 20:19:43 -0000, "john"
<[email protected]> wrote:

>I was adding some new accessories to fuse no 6 the cigar lighter circuit ,
>when I pulled the fuse the alarms went off and the engine is now
>immobilised. I cant reset the system with either one of the 2 remote fobs I
>have, I have tried the emergency key access, loads of times with 30min
>breaks in between without success also i have tried the recognition sequence
>for the key fob again.Any help would be greatly appreciated.
>

Wat worked for me was disconnecting the pattery -> press 'open' switch
on the remote' -> reconnect battery.

Peter R.

 

T

TonyB

Guest

• Jan 27, 2005

• #5

>
> Wat worked for me was disconnecting the pattery -> press 'open' switch
> on the remote' -> reconnect battery.

Did it work for you John??
TonyB

 

M

Mungo

Guest

• Jan 28, 2005

• #6

"Peter R." <[email protected]> wrote in
>...
>[...]
>i have tried the recognition sequence for the key fob again.
>
>

Interesting -whats that?

 

P

Peter R.

Guest

• Jan 31, 2005

• #7

On Thu, 27 Jan 2005 13:39:20 +0000 (UTC), "TonyB"
<[email protected]> wrote:

>>
>> Wat worked for me was disconnecting the pattery -> press 'open' switch
>> on the remote' -> reconnect battery.
>
>Did it work for you John??
>TonyB
>
>
Since he can't be buggered to answer it probably has.

Peter R.

 

J

john

Guest

• Feb 3, 2005

• #8

Sorry if u didnt get a reply i tried to answer everybody,
but any way what happened was to my regret, my wife got the car taken into
landrover coz she couldnt wait and it cost me £178 plus towing fees to
come.Thank u all anyway
"Peter R." <[email protected]> wrote in message
news:[email protected]...
> On Thu, 27 Jan 2005 13:39:20 +0000 (UTC), "TonyB"
> <[email protected]> wrote:
>
> >>
> >> Wat worked for me was disconnecting the pattery -> press 'open' switch
> >> on the remote' -> reconnect battery.
> >
> >Did it work for you John??
> >TonyB
> >
> >
> Since he can't be buggered to answer it probably has.
>
> Peter R.