Just thought I'd stick a post in so I can hopefully help people If they had same problem I did. I work in a garage and got a disco in last week, sluggish, hard to start, cutting out after a couple mile, so straight away looked at plug at ecu, soaking with oil, new injector harness in and oil cleaned up, still no better, so looked into it abit more and ordered up injector seals, copper washers and o rings, stuck thm in, result, no cutting out, going far better but still not the best, only taking off when the turbo kicked in, so air flow meter on and customers says its never run better, so if ure discos cutting out good chance good be injector seals
discovery td5 cuts out after 2 mile
- Thread starter pagan86
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
mastiff
Active Member
- Posts
- 119
- Location
- Birmingham(UNFORTUNATELY)
Hi, this mujst be fate. I've got a post going at the moment about this. Can you tell me how difficult it is to do the seals job. How long it takes and how much you charged. Just want an idea so i can tell if my mech. is taking the pi@@.
Cheers
Rob
Cheers
Rob
sierrafery
Well-Known Member
- Posts
- 18,204
- Location
- Arad/Romania
all those 3 bits
...i knew just about washers and o-rings .... could u give me the part numbers please?mickinwolves
Member
- Posts
- 12
- Location
- westmidlands
Hi, this mujst be fate. I've got a post going at the moment about this. Can you tell me how difficult it is to do the seals job. How long it takes and how much you charged. Just want an idea so i can tell if my mech. is taking the pi@@.
Cheers
Rob
hi had the same problem it was doing my head in, I put it into local indi it cost me £115 best money I ever spent
There's a chap who has a site called www.discovery2.com. This is one of the jobs he has done a write-up on with lots of pictures.
srtgray
New Member
- Posts
- 475
- Location
- On the Lake Geneva Shoreline
