Discovery PAS on Defender
- Thread starter c18rch
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
jai_landrover
Well-Known Member
- Posts
- 13,392
- Location
- Luton
Not 100% sure, although paddocks list them as different items, so I would think they are different.
Defender up to end of 200tdi 1992 = NTC9070,
Disco 200tdi = NTC8288
Unless yours is a conversion from a disco engine into a early defender.
Defender up to end of 200tdi 1992 = NTC9070,
Disco 200tdi = NTC8288
Unless yours is a conversion from a disco engine into a early defender.
Yeah, from what I can tell the defender pump has the inlet on the back of the pump. Like this:
http://zebra-parts.co.uk/shop/images/lr/ntc9070.jpg
and the discovery has it on the side. Like this:
http://zebra-parts.co.uk/shop/images/lr/anr2003.jpg
I was wondering if it makes any difference because the mounting points on each engine look the same.
http://zebra-parts.co.uk/shop/images/lr/ntc9070.jpg
and the discovery has it on the side. Like this:
http://zebra-parts.co.uk/shop/images/lr/anr2003.jpg
I was wondering if it makes any difference because the mounting points on each engine look the same.
Patman1200
Active Member
- Posts
- 908
- Location
- RAE Sleepy Valley
When I swapped a Disco 200 into my 110 u used all the Disco pipework into the 110 steering box with no problems, so the pipes are interchangable. I've not removed the Disco PAS box yet but I will be keeping that for a spare.
