Discovery II seats into a 2007 110

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

James R

New Member
Posts
231
Hello all. I am a newbie so please be gentle!

I have just bought a couple of Disco II electric leather seats (from a '99 car) and want to put them in my Defender. Any help, photos, guidance would be much appreciated. How do I do this?!
 
if they are the same as mine i ground of the subframe till i was left with the runners, drilled them and bolted in place. will post piccie later.LEE
 
Hi James. piccies as promised, the seats are extremely comfortable with the added advantage of handles for middle seat passenger when you go offroad.
what i did was use the original fitting rear right for drivers seat and rear left for passenger and drilled the seat box for other fixings, this meant that you sit inline with the pedals.
 

Attachments

  • 007.jpg
    007.jpg
    244.3 KB · Views: 2,650
  • 008.jpg
    008.jpg
    236 KB · Views: 1,127
  • 009.jpg
    009.jpg
    243.9 KB · Views: 2,476
Hi Guys, I know this is a very old post, but I have a series 3 88", would this work for mine? or does only work for 109/110's?
 
i know it has been a wile

but dose anyone know if you can put disco 2 seats in the back of a 110 i have seen 1 picture but cant find it again and there is no information anywhere that i can see

also how do you get around the eclectics on the front seats because i would like to use the heating element in them but not sure about how to make them move with electric
 
with lots if internet searching i managed to find the seats in the back of a 110 but i still don't understand how it has been done can anyone explain
 

Attachments

  • Screen Shot 2017-10-18 at 08.54.53.png
    Screen Shot 2017-10-18 at 08.54.53.png
    416 KB · Views: 446
Back
Top