discovery 2 td5 spot lamps
- Thread starter 4x4xfar
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
martinhollings
New Member
- Posts
- 659
- Location
- newark/nottingham
yes there is a propper loom for the disco 2 but its not cheep but it keeps every thing standard tiday and gives you the propper switches i am guessing but it wont be less than £60 and dont no realy where to get one from
have a quick look to see if its already fitted tryremoving the 3rd switch blank down on the left hand side of the guages and see if the wires are there and have a look at the engine bay fuse box there should be an extra black box at the back with a fuse stuck on to the side of it
found this link that may be of some help
www.discovery2.co.uk** Driving / Spot Lamps
have a quick look to see if its already fitted tryremoving the 3rd switch blank down on the left hand side of the guages and see if the wires are there and have a look at the engine bay fuse box there should be an extra black box at the back with a fuse stuck on to the side of it
found this link that may be of some help
www.discovery2.co.uk** Driving / Spot Lamps
discool
Well-Known Member
- Posts
- 13,699
The wiring is existing on later D1's, are you saying this is not the case on the D2's and LR now charge for the additional wiring.
barczyk
Active Member
- Posts
- 118
- Location
- Newark Notts & Krakow, Poland
Recently did this job on mine with a wiring loom bought off Ebay -First class construction for 24.99. Bought from Mendip auto electrical - he has them for pre-face lift and post face lift models.
martinhollings
New Member
- Posts
- 659
- Location
- newark/nottingham
i dont realy no as the spots were all ready on my disco but i no others have had to fit the loom dont no if the wiring became standard at any time or was fitted to top spec models
