Daves disco
Member
- Posts
- 57
- Location
- Nottingham
Morning all. I have removed the air springs from my 2002 Discovery 2 and the SLS fault light is staying on, for obvious reasons. My query is how do I rewrite the BCU with a Nanocom? Thanks
Discovery 2 SLS Conversion
- Thread starter Daves disco
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
sierrafery
Well-Known Member
- Posts
- 17,118
- Location
- Arad/Romania
Hi. With nanocom you have to set it to coils in SLABS ECU first
then in BCU settings - instrument pack set SLS to NO then "write settings" before you exit and wait 60 seconds after you turn ignition off to unplug nanocom
then in BCU settings - instrument pack set SLS to NO then "write settings" before you exit and wait 60 seconds after you turn ignition off to unplug nanocom
Daves disco
Member
- Posts
- 57
- Location
- Nottingham
Great, thanks.
