Neither of the rear seats were operational on my 2000MY Disco2.
Today I have managed to make one perfect one from two. A spring was missing on the link between the cams on the "leg" - and some other parts needed lubricating.
On the second seat things dont look so great. The spring is now missing, and the plastic lever for the upper folding part of the seat is cracked. - so will need these two parts.
My main worry is with one of the cams in the larger "leg" assembly. The front cam, that physically locks into the floor feels very loose. It should normally interact with the cable assembly (looking at the other seat). This is not happening on the second seat.
There are two nuts and bolts that can be removed, and small bushes fitted on these - not gone any further - because got stuck
If this assembly can be removed - possibly this cam can be replaced - or its issues resolved.
If not and this is where the question is - what spares are available for fixing these parts? Can each bit able to be ordered seperately - or is it large parts only - and expensive pieces! Any help would be appreciated - any links to any info would be helpful.
Thanks in advance
Today I have managed to make one perfect one from two. A spring was missing on the link between the cams on the "leg" - and some other parts needed lubricating.
On the second seat things dont look so great. The spring is now missing, and the plastic lever for the upper folding part of the seat is cracked. - so will need these two parts.
My main worry is with one of the cams in the larger "leg" assembly. The front cam, that physically locks into the floor feels very loose. It should normally interact with the cable assembly (looking at the other seat). This is not happening on the second seat.
There are two nuts and bolts that can be removed, and small bushes fitted on these - not gone any further - because got stuck
If this assembly can be removed - possibly this cam can be replaced - or its issues resolved.
If not and this is where the question is - what spares are available for fixing these parts? Can each bit able to be ordered seperately - or is it large parts only - and expensive pieces! Any help would be appreciated - any links to any info would be helpful.
Thanks in advance