Discovery 2 Fuel lines from tank to fuel filter

I have just replaced the 4 lines from the tank and the girl won't start Have been trying for 3 days now. Can anyone help with the layout and colours of the lines going to the filter as I am now not 100% sure I have connected them up correctly. The attached photo is what I have connected up to fuel pump. The green line is connected to a fitting under the chassis. I hear the fuel pump working when I run it through the auto bleed routine, but don't know how to check it is getting fuel. .

tank is correct green does go to the line along the chassis as is feed to the fpr
white goes to rear outer fitting on filter head ,black front outer fitting ,blue rear inner fitting and front inner fitting is return from fpr, undoing the filter drain and having a constant flow with ignition on shows low pressure side is feeding the filter

Thanks very much for that info. Will open drain and see what happens and double check lines as per your guidance. Will post results tomorrow hopefully with a positive result

Well I went out this evening and found the blue and white were on wrong way round. Connected up as you said and away it went. I am very grateful for your help Thanks a lot !!!!

Hi... quick question... were you able to change these lines without dropping the tank down? Can you just wiggle them into place and connect them up ?
thanks
M

Welcome to the forum