Disco wires?
- Thread starter sash
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
sparky steve
Active Member
- Posts
- 226
- Location
- chester
alexdon
New Member
- Posts
- 329
- Location
- Hampshire - Havant aclew
If it is a D1 they come from the ignition module which is between the coil and distributor. There should be 2 white wires going into it.
discool
Well-Known Member
- Posts
- 13,513
For those who don't know only a D1 3.9 has a distributor, information supplied in the OPs post. Same for other LRs with a similar engine.
The blue wire from the distributor goes to terminal 1 of the ignition module and the red wire to terminal 3 on the module, terminal 2 is spare.
The two white wires on the other side of the module go to the coil.
The blue wire from the distributor goes to terminal 1 of the ignition module and the red wire to terminal 3 on the module, terminal 2 is spare.
The two white wires on the other side of the module go to the coil.
Last edited:
