Disco Refurb

Hi Guys, Just thought I'd show you some pics I took after making the mistake of lifting up the carpet in tha back of my 96 disco. This job is almost done but there are many more before I'll be happy.

Mike

Ive noticed the metal has chopped off the little finger does it hurt

Not the worst floor I've seen on here... good job though. having the floor out does have it's advantages... new shocks, clean sedimentor and a bit of chasis welding when I did mine last year.

Andy200TDi said:

Not the worst floor I've seen on here... good job though. having the floor out does have it's advantages... new shocks, clean sedimentor and a bit of chasis welding when I did mine last year.

Click to expand...

Had a good look round while the floor was out, i've freed off all the bolts for everything I need/want to refurb, the 2 seat belt anchor points on the wheel arches need attention o/s is far worse than the near side but the sills and the chassis itself including the rear cross member are mint apart from some surface rust which will be rubbed down and painted. I'm in the process of getting the 20t press at work fixed at the moment so I can do all my bushes if they need it or not. to be honest, when I found this disco after looking at about 20 before I knew it must be the one to get as it has a full main stealer service history upto 80k and it's only on 91k now.

Mike

I have managed my bushes without a press, you jan cut a slot across them then knock them out.