Disco dashboard issues

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Thomo1927

Active Member
Posts
361
Location
South Walian
Just noticed my 300 tdi 95 disco dashboard lights on my needles don't work. Everything else lights up. A bit of a pain driving in the dark and can't see the needles,Any ideas. Cheers
 

Attachments

  • image.jpeg
    image.jpeg
    169.9 KB · Views: 221
Perhaps the needles are lit via a fibre optic, if so the source illuminating bulb could have failed or both fibres have become detached. It's not unheard of as that's how the needle its illuminated on the RRc as I found out many years ago.
Remove the pod and have a look see.
 
@Thomo1927 ; Out of interest, and because I have a bulb gone on the LHS in my pod, which LED's did you use please?

This might get urgent, as, when i am doing 130, :DI can't see the needles, Officer, o_O :D:D

BTW, they look really good....:)
 
At the top of the cluster there are a couple of bulbs (one each side) which illuminate the needles via fiber optics, while not difficult to change getting at them was a bit of a pain in the ass, having to remove the steering wheel & disconnect the switches from the binnacle. Mine have failed twice, EBay Chinese LED's i guess.
 
At the top of the cluster there are a couple of bulbs (one each side) which illuminate the needles via fiber optics, while not difficult to change getting at them was a bit of a pain in the ass, having to remove the steering wheel & disconnect the switches from the binnacle. Mine have failed twice, EBay Chinese LED's i guess.

That's correct , Almost missed those bulbs :eek:
 
Back
Top