disco 300 on lt77 airbox/snorkel

hey guys and girls, been a while since ive been on here but ive just bought a def 90 with a diso 300 engine bolted upto the original lt77 box. not yet picked it up but im after some tips on routing the air intake piping. the original owner whos carried out the conversion, which is pretty tidy to be fair, hasnt refitted an air box, but used a cone filter due to the restrictions around the bulkhead. my first job is to route the intake piping properly, to an air cleaner, and out to a snorkel, so im hunting for pictures and tips from those who have done this already. do i buy 300 snorkel for the drivers side, or 200 snorkel for nearside? which airbox and bolted where? and finally which way have you all routed the pipework.
any help chipped in is much appreciated as ive trolled around through google, image searches etc to very little avail.
cheers,
James

I'm wondering about this when I get the 300 in me 90 but mine is on an R380 and there is plenty of room behind the engine.
I was lookin at just going back from the turbo and out under the heater then out through the vent in the wing and up on the nearside. It's either that or cut the bonnet at the back and go straight up out of the wing.

thanks for the reply, thinking maybe a disco 300 airbox and 200 snorkel up nearside might work?