Disco 2 to disco 3

Hi folks, just a quicky about your fav topics. "Wheels & tires".
Has anybody put a set of 18" alloys from a disco 2 to a disco 3 & if so how?
I have done a search, but can only find info vice versa. I did try, but the bastards won't fit over center hub. :-(
I bought a brand new set of General Grabber At 2 for my disco 2 but sold it recently, so I kept the tires & alloys for my disco 3, in hope of some good winters. Any info would be great thanks in advance.

As you say, the spigot sizes are different, so a straight fit isn't possible. Best bet is to contact Rakeway who make the adaptors allowing D2 wheels to fit D1s etc - Land Rover If anyone can/does make such an adaptor as you're after, I reckon it'll be them.

HTH

NB You could always take the tyres off the D2 wheels and fit them on D3 wheels? Assuming there is an 18" D3 wheel of course!

ArticFox said:

As you say, the spigot sizes are different, so a straight fit isn't possible. Best bet is to contact Rakeway who make the adaptors allowing D2 wheels to fit D1s etc - Land Rover If anyone can/does make such an adaptor as you're after, I reckon it'll be them.

HTH

NB You could always take the tyres off the D2 wheels and fit them on D3 wheels? Assuming there is an 18" D3 wheel of course!

Click to expand...

Thanks