Disco 1 welding

Does any one know were to get the piece of rubber that goes between the body and the under side of the arch after they have been re-welded and what to stick/attach it with?

Skipdog said:

Does any one know were to get the piece of rubber that goes between the body and the under side of the arch after they have been re-welded and what to stick/attach it with?

Click to expand...

Do you have a picture to help guide us in what you need.

No I don't but having thought about it I will use a piece of car tyre and hold it in lace with tiger seal

Ford festa boot rubber works for me
any car park nice n cheap. best bit on um

you on about the 3" rubber edge on the plastic inner wheelarch trim that goes between the inner wheel arch and the outer wing skin

if so all i do is put the old plastic bit back on and then edge it up with a 3" wide strip of flash band heated up with a heat gun and smoothed out with a decorators scraper till the tar oozes out of the edges

then lash it over with plenny of underseal