Disco 1 v8 blowing fuel pump fuse ????

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Mikebraddock

New Member
Posts
6
Location
Manchester
any one help just replaced clutch , master cylinder and slave cylinder on my 98 v8 discovery and now it keeps blowing fuel pump fuse checked all wiring for damage as I had to do a bit of welding on chassis any help would be most appreciated
 
Thanks discool checked lambdas disconnected pump and lambdas still blowing bloody fuses think I need to trace wiring back from fuse now unless you know a quicker way thanks in advance Mike
 
After removing the relay you can easily check the conternuity of the wiring away from it with a meter, and by following the wiring diagram which can be found in the Haynes manual.
But check the fuse after the removal of the relay first.
IMG_6791.JPG
 
Hi thanks for your help traced it to lambda sensors just cut the wires at relay and hey presto running again so now just got to figure out which side is playing up on lpg so not a biggy on my list of too dos haha
 
Back
Top