disco 1 bumper & rock slider plans wanted

hi all
after some plans to make my own winch bumper and rock sliders
ive plenty of steel stock at work and am a decent welder as i weld and repair cranes for a job

p.s i did have another thred for this but buggerd if i can find it:doh:

matthew2riches said:

Click to expand...

thats the thing , how do they fix on ?
as it happens i have some 50mm box and cds tube

blu tak

blue tak dont be silly,double sided tape is much better

matthew2riches said:

Click to expand...

What amp welder are you using

pressbrake said:

What amp welder are you using

Click to expand...

as its my job at work fixing and welding cranes
ive got several arc welders from small inverta up to a old 3 phaze monster that will happly weld 50mm plate all day

a couple of full size 3 phaze migs that weld from 0.5mm to around 35mm ,can also heat and weld , can do ally if i have to but dont like the smell:doh:

fabricating and welding isnt a problem as its my job
its just that ime new to landy's and what can and cant be done ,
so am on a steap learning curve , and cant see the point spending hundreds of pounds on somthing i can make
P.S HAVE HAD LOADS OF DECENT ADVICE SINCE JOINING THE SITE

If you are good at fabbing i would remove the sills and replace with box will also double as slider you really dont need plans its just a rectangle nothing complicated

dyte said:

If you are good at fabbing i would remove the sills and replace with box will also double as slider you really dont need plans its just a rectangle nothing complicated

Click to expand...

cool , thats what i hoped , but thats why ime on a learning curve with disco's , and why i said ime not sure what you can and cant do

pressbrake said:

What amp welder are you using

Click to expand...

As you can see, not enough! They've got to be cut off an re-welded with my new Lincoln. Was using a small clarke with bad issues with the contactor and wire feeder.

I so miss having 3 phase. Have a lovely Kempi mig but don't have nothing to plug it into to