Disco 1 300

After a lot of problems with the wiring harness.
Does anyone know (I know which relays
To look at)
If I take out the relay's and put a separate fused wire to operate fog and the rear wiper.

The reason for relays is usually because your switch can’t or wouldn’t handle the current draw.
In simple terms.

So probably not your best idea.

J

U

Mellbell said:

After a lot of problems with the wiring harness.
Does anyone know (I know which relays
To look at)
If I take out the relay's and put a separate fused wire to operate fog and the rear wiper.

Click to expand...

Both circuits have relays but are controlled by the vehicle’s ‘multi function unit’…. so to operate the relays independently you will have to remove the MFU controlling link to both relay coils, and install a switch link to ground plus change the switches and the fused 12v supplies exist, you will loose the rear wash wipe and the rear wipers delay function.
Thats about it, bypass the MFU functions or place a switch in the existing supply and ground the the relay coil directly.





Sent from my iPad on a train.