dr pepper
New Member
- Posts
- 1,438
- Location
- lancashire
Is a 101 a series with a diffo body, or a totally diffo thing alltogether.
Diffo's between a series and a 101
- Thread starter dr pepper
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
diesel_jim
New Member
- Posts
- 128
Totally different.
There will be some items that are usable on both (door tops?) some interior dash fittings.
The engine & gearbox are (more or less) the same as the series 3 109" stage1 V8.
Axles are totally different. suspension, although leaf spring as in a series 3 standard rover, are much bigger (longer & wider)
bodywork is totally different too.
There will be some items that are usable on both (door tops?) some interior dash fittings.
The engine & gearbox are (more or less) the same as the series 3 109" stage1 V8.
Axles are totally different. suspension, although leaf spring as in a series 3 standard rover, are much bigger (longer & wider)
bodywork is totally different too.
Teflon
New Member
- Posts
- 683
101 was based on early Range Rover; engine, gear-box, and adapted chassis rails.
Just aboput everything else is unique to the model, though obviousely there are a lot of parts rummaged from Landy stores.
Axles & springs are definitely different from almost anything else; and body obviousely.
Just aboput everything else is unique to the model, though obviousely there are a lot of parts rummaged from Landy stores.
Axles & springs are definitely different from almost anything else; and body obviousely.
howardo
New Member
- Posts
- 6,783
- Location
- In the woods
dr pepper
New Member
- Posts
- 1,438
- Location
- lancashire
So its not the same then, maybe I wont get one as the next project.
Davec
New Member
- Posts
- 2,131
No, even they are different. Apart from the odd switch or dial I doubt there is much in common
