diff replacement

w_mac · Apr 8, 2007

Hi All!

Quick question for you all.

Different people have told me different ways to remove the half shafts a little to get the diff in position so I thought I would clear it up a little. 1974 series 3

Do I have to remove the wheels brake drums etc or can I leave the Landy on its wheels and remove the flange and half shaft together? Just dont want to do more than I have to

Oh yeah, is there any special tools I might need? Cheers

Codbasher · Apr 8, 2007

Undo the 5 or 6 bolts holding the flange in and slide em out...

No need to remove wheels etc..

You may have to prise em a bit with a screwdriver, but thats all I needed..

w_mac · Apr 11, 2007

Thanks Codbasher!

I fitted the rear diff today but gave up on the front. If only it was possible to pull the half shafts out like the back

Thanks again.

Mr-Tomcat · Apr 11, 2007

Unscrew the 6 or 8 nuts and bolts holding the chrome ball and pull the shafts away from the diff that way, hard work but if they need doing it may be your only chance.

diff replacement

w_mac

New Member

Codbasher

New Member

w_mac

New Member

Mr-Tomcat

New Member

Similar threads