Diesel Do's L Series

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
image.jpeg
image.jpeg
image.jpeg
image.jpeg
image.jpeg
image.jpeg
 
Wow! All pics I've seen of the 3 doors with the roof off before have looked cack. Your one looks the dog's wotzits :)

Everything looks in the right proportion and detail - fantastic job - well done.
 
Don't suppose you fancy making kits for the steering mod you did? I'm planning to fit a lift kit at some stage and don't want ruin the handling or cut the frame.
 
Don't suppose you fancy making kits for the steering mod you did? I'm planning to fit a lift kit at some stage and don't want ruin the handling or cut the frame.

I've had a few people ask about it. I'm pondering it at the moment. Need to do a few checks on mine. Give it some proper abuse and make sure it holds up to it. Concerns would be differing skill levels for welding it on. I'm developing a few parts at the moment to put on my online shop. Including a snorkel
 
My welding is pigeon poo most of the time so I don't think I would try it myself. Lack of skill and the fact my welder wouldn't be up to it means if I want to go down the same route as you I need to buy the parts. For now I'm going to go ahead and buy a 2" lift kit and a set of bigger tyres and see how it goes, if the bump steer is too bad I'll rethink it.
 
My welding is pigeon poo most of the time so I don't think I would try it myself. Lack of skill and the fact my welder wouldn't be up to it means if I want to go down the same route as you I need to buy the parts. For now I'm going to go ahead and buy a 2" lift kit and a set of bigger tyres and see how it goes, if the bump steer is too bad I'll rethink it.

I didn't do it because of bump steer. It was because of the catching even with it trimmed. I could supply it fitted to struts but it'd get expensive
 
I didn't do it because of bump steer. It was because of the catching even with it trimmed. I could supply it fitted to struts but it'd get expensive
I see, would be nice to have the steering arms up out of the way. Maybe some day I'll pick up a couple of 2nd hand struts to play with but will leave well alone for now and concentrate on the lifting and bigger wheels. I was looking at a set of Toyo AT 215 x 80 R16. In theory they should have a very similar diameter to yours.
 
Back
Top