depressurizing brake system
- Thread starter danrange4
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
magictiny
New Member
- Posts
- 435
- Location
- Billingshurst, West Sussex
I thought you just pumped the brakes 30 odd times with the engine off.....
magictiny
New Member
- Posts
- 435
- Location
- Billingshurst, West Sussex
From RAVE
1. Switch off ignition.
2. Operate the brake pedal 30 times. Pedal travel
will increase slightly and reduced resistance will
be felt as pressure decreases.
3. Wait for 60 seconds, press the brake pedal four
more times. This procedure will ensure that all
pressure is evacuated from the system.
1. Switch off ignition.
2. Operate the brake pedal 30 times. Pedal travel
will increase slightly and reduced resistance will
be felt as pressure decreases.
3. Wait for 60 seconds, press the brake pedal four
more times. This procedure will ensure that all
pressure is evacuated from the system.
- Posts
- 58,170
- Location
- Preston Lancs.
Or he could just unscrew the accumilator and start his very own Cape Kennedy. This would also create one of those cool bonnet blisters that the boy racers like in their Corsas.
magictiny
New Member
- Posts
- 435
- Location
- Billingshurst, West Sussex
Perhaps you have come up with another method to test the accumilator - instead of all that palava with pressure guages etc., just unscrew it and see how high it fliesOr he could just unscrew the accumilator and start his very own Cape Kennedy. This would also create one of those cool bonnet blisters that the boy racers like in their Corsas.
magictiny
New Member
- Posts
- 435
- Location
- Billingshurst, West Sussex
Cool beans - well done.
Khryztal
New Member
- Posts
- 725
- Location
- Felcourt. Surrey
I just attach pipe and jug to bleed nipple and undo lol
