steve999
Active Member
- Posts
- 307
- Location
- Stoke on Trent, Stafforshire
Land Rover Defender TDCI or Discovery 2, double cardon wide angled front propshaft and transfer Box Output Flange purchased from Devon 4x4 around 12months ago had very little use.
http://www.devon4x4.com/index.php?p...don+Propshaft&option=com_virtuemart&Itemid=14
The slide has been over greased pushing the end cap off,end cap has gone missing so you'd need to seal that or tack weld a cap on.
680mm length to suit Tdci Defender
Please note - these feature the larger Discovery 2 flange fitment on the gearbox end. If the Land Rover is not a Discovery 2 you will also need to change the front transfer box outbox flange
£150 + postage.
http://www.devon4x4.com/index.php?p...don+Propshaft&option=com_virtuemart&Itemid=14
The slide has been over greased pushing the end cap off,end cap has gone missing so you'd need to seal that or tack weld a cap on.
680mm length to suit Tdci Defender
Please note - these feature the larger Discovery 2 flange fitment on the gearbox end. If the Land Rover is not a Discovery 2 you will also need to change the front transfer box outbox flange
£150 + postage.
Last edited:
