defender free wheeling hubs

BIGBENNY777 · Dec 26, 2012

jamesmartin said:
they are useless with out the diff part ,i have plenty of wheel ends like those as do a few after fitting the lt230 in series unless you weld rear center diff sun gear to the housing

just found the link for them Products AVM

LAND ROVER

Application

Year

Splines

Bolts

P.C.D. (mm)

AVM Model

Service Kit

Manual

Autom.

Serles I, II & IIA, III88" W.B.

48-80

10

6

95,25

405

-

4405

Serles III, 88"/ 109"W.B.

73-85

24

6

95,25

406

-

4406

Defender (all), Descovery 1 (All)

94-->

24

5

93,45

751**

-

-

Defender (all),Descovery 1 (All)

Except

With Factory Aluminyum

Alloy Wheels

451**

-

4451

Defender 90*

84-85

24

5

93,45

446**

-

4446

Defender LR 110*

-->08/86

Defender 110 & 130*

86-93

*Only with Transfer Case LT230 & LT230T.
** Conv. 4X4 Fulltime to 4X4 Parttime with locking hub

Mark L · Dec 26, 2012

Benny, you going to the Welsh woods P&P with Matt & co. at the end of Jan?

BIGBENNY777 · Dec 26, 2012

Mark L said:
Benny, you going to the Welsh woods P&P with Matt & co. at the end of Jan?

yes mark

you comin

Mark L · Dec 27, 2012

Yes, mate. See you in Jan.

BIGBENNY777 · Dec 27, 2012

yeah see you there m8 .. last time we went we called by at little ripoff in the morning

not knowin that they got hot food on site

and bloody cheap too

so all good

:bounce:

Paul D · Dec 27, 2012

Just wondering like ... if I had a welded rear diff, would fitting these hubs allow me to fit the welded diff to the rear axle and use it almost normally on the road? (300Tdi Disco 1) 'cos it sounds like a way to get a locked diff offroad, with unlocked on-road, without the great expense of ARB/Ashcroft et al locking diffs?

If anyone knows???

jamesmartin · Dec 27, 2012

Paul D said:
Just wondering like ... if I had a welded rear diff, would fitting these hubs allow me to fit the welded diff to the rear axle and use it almost normally on the road? (300Tdi Disco 1) 'cos it sounds like a way to get a locked diff offroad, with unlocked on-road, without the great expense of ARB/Ashcroft et al locking diffs?

If anyone knows???

no youd need to weld center diff(rear output)to get drive,rear axle would scrub tyres

blue beasty · Dec 27, 2012

Late series 3 used 24 spline.......I reckon

Paul D · Dec 27, 2012

jamesmartin said:
no youd need to weld center diff(rear output)to get drive,rear axle would scrub tyres

I'm thinking when going offroad or slippy greenlaning centre diff locked and hubs locked with a welded rear diff should act as though I had a normally locked (arb etc) rear diff. On road, hubs unlocked and cdl unlocked should give me similar to what it has now, standard system .. or would this just give me effectively one wheel drive at the front and no drive to the rear? .. hard to think straight at the mo ...

jamesmartin · Dec 27, 2012

if you had center diff locked and welded rear diff with fwh locked it would give ,equal drive to both rear wheels as with axle locker ,then you could release one fwh for road ,in that one wheel is free with no drive with center diff unlocked front would act as std on the road

Paul D · Dec 27, 2012

jamesmartin said:
if you had center diff locked and welded rear diff with fwh locked it would give ,equal drive to both rear wheels as with axle locker ,then you could release one fwh for road ,in that one wheel is free with no drive with center diff unlocked front would act as std on the road

Yeah, makes it worth thinking about .. don't have spare cash at the mo'. Don't have spare cash ever, it seems lately!

jamesmartin · Dec 27, 2012

ive some youy can have if you want to try ,i have no use for them

Paul D · Dec 27, 2012

jamesmartin said:
ive some youy can have if you want to try ,i have no use for them

That'd be good James.

We get out Louth way sometimes, if you don't mind us dropping in one day?

jamesmartin · Dec 27, 2012

Paul D said:
That'd be good James.

We get out Louth way sometimes, if you don't mind us dropping in one day?

youd be welcome

Paul D · Dec 27, 2012

jamesmartin said:
youd be welcome

Cheers, I'll get in touch next time, probably early feb, we're close enough ..

defender free wheeling hubs

BIGBENNY777

New Member

Mark L

Well-Known Member

BIGBENNY777

New Member

Mark L

Well-Known Member

BIGBENNY777

New Member

Paul D

Old, nackered 'n broke, but the Landy is fine . :)

jamesmartin

Well-Known Member

blue beasty

Leaks an prone to bits dropping off

Paul D

Old, nackered 'n broke, but the Landy is fine . :)

jamesmartin

Well-Known Member

Paul D

Old, nackered 'n broke, but the Landy is fine . :)

jamesmartin

Well-Known Member

Paul D

Old, nackered 'n broke, but the Landy is fine . :)

jamesmartin

Well-Known Member

Paul D

Old, nackered 'n broke, but the Landy is fine . :)

Similar threads