Defender 90 200tdi straight through tailpipe?

Hi, ive looked for ages to find a straight through tailpipe for a Defender 90 200tdi but with no such luck. Anyone know where I can find one or can have one made? Thanks.

Buy some tube & make it yourself, that's what I did.

666 george said:

Buy some tube & make it yourself, that's what I did.

Click to expand...

yep

try an find some food grade s/s thin wall pipe also whats called tri clamps these fit on to the slightly flared ends .You can buy elbows providing your ok with a welding set i made a bumper for me 110 out of it

wiltshire landyman said:

yep

Click to expand...

yep here too!

couldnt find any for sale, so just did my own

Yeah I guess I can do that. JUst seems strange that nobody makes one for the 200tdi 90. There one for the 110 200tdi it seems but not the 90! How is it working for you guys anyway? Im looking for a improvement in performance aswell as the note. Whats yours like?

Performce what's that ?
I did mine cos I couldn't weld the swiss cheese of an exhaust back together again.
& it was almost dragging on the floor.
Middle pipe is stainless off the shelf & made the back end with mild steel & a side exit.

I cut the rotten boxes out of mine and replaced with SS tube. Sounds nice enough.

You can't buy them. You can buy a mid section. I did see one on ebay once but I've never seen one since. Go to your local exhaust place and get some 3 inch pipe. I made mine from the exhaust of a discovery. I used the original down pipe then the rest is home made. It sounds like an animal even if I do say so myself.