defender 200 seat box repair panels?
- Thread starter leeby7
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
td5tool
New Member
- Posts
- 358
- Location
- Huddersfield
Got mine for my 200 from YRM solutions
Bit dear bit very good quality and fits very well
Bit dear bit very good quality and fits very well
Landyfox
Well-Known Member
- Posts
- 4,489
There's a reliable seller on eBay who sells them!
To be honest they are easy enough to make, us cardboard to make a template and then buy a sheet of 3mm steel. You can either weld or potrivit into place.
To be honest they are easy enough to make, us cardboard to make a template and then buy a sheet of 3mm steel. You can either weld or potrivit into place.
There's a reliable seller on eBay who sells them!
To be honest they are easy enough to make, us cardboard to make a template and then buy a sheet of 3mm steel. You can either weld or potrivit into place.
Cant pop rivet according to my mot man, he failed me on the fibreglass matting that I reinforced the bottoms with, and the non standard (plastic) floor that I put in.
He said it was too close to seat belt mounts
Landyfox
Well-Known Member
- Posts
- 4,489
Cant pop rivet according to my mot man, he failed me on the fibreglass matting that I reinforced the bottoms with, and the non standard (plastic) floor that I put in.
He said it was too close to seat belt mounts
Are you serious.?
In that case pop-rivet it in place and cover the rivets with liquid metal
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
Hi was wondering if you can buy the sections that make the seat box up? mines rotten on the battery tray side, the panel facing the rear axle?
which bit do you mean , battery tray is steel and will weld
