Deep Dish Modulars
- Thread starter steve-c
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Boris113
Well-Known Member
- Posts
- 1,356
I have my 285s on 16 x 8 modulars with a neg 32 offset. After a year of hard use, I've had no problems with wheel bearings -unlike the spacers that I had on previously.
wiltshire landyman
I’m back
- Posts
- 15,062
- Location
- salisbury plain wiltshire
Wot size tyres u putting on them
16x10 is probably too wide for 265. Do you have a link?
Mark L
Well-Known Member
- Posts
- 2,693
- Location
- Tamworth - Staffs
I'm guessing it'll be these people. Their prices are pretty good.
items in JCS 4x4 Wheels and Tyres store on eBay!
items in JCS 4x4 Wheels and Tyres store on eBay!
Boris113
Well-Known Member
- Posts
- 1,356
265s would be unsafe on a 10 inch rim, they are meant to go on a 7 inch. There is no reason why you can't fit them to an 8 inch (i think 
), although you may increase your chances of pulling the bead off at low pressures. What reason are you wanting to fit wider wheels for?
), although you may increase your chances of pulling the bead off at low pressures. What reason are you wanting to fit wider wheels for?
wiltshire landyman
I’m back
- Posts
- 15,062
- Location
- salisbury plain wiltshire
They wont fit safely 8" maybe but not a 10" rim
Similar threads
