Dead man walking How do you get oil of drive?

90truckcab · Mar 25, 2010

sypher said:
If there slabs just turn them over

thems got one rough side and one face usualy , and thers 5 spots of rock hard dab to nock off them too

dint yer used to get that industrial cat litter stuff fer oil spills ?

buckshot · Mar 26, 2010

my old man has concrete paving bricks , had a 300tdi disco for a few years and that thing leaked like a bastid (engine and power steering box)
he clean hit on a regular basis and swore by hammerite thinners worked really well i must admit

w3526602 · Mar 26, 2010

Hi,

Pile cement (dust) onto the oil, let it soak it up like blotting paper. The longer you leave it, the better, but don't let it get wet.

Scrubbing brush and Swarfega, hose it off?

602

The Mad Hat Man · Mar 26, 2010

w3526602 said:
don't let it get wet.

have yu looked outside recently?

G-man · Mar 26, 2010

have you tried coke?

as in the cola not the stuff yer stick up yer hooter (or round yer gums or up yer arse)

it'll clean the **** out of most stuff! its really good on blood

sypher · Mar 26, 2010

G-man said:
as in the cola not the stuff yer stick up yer hooter (or round yer gums or up yer arse)

Is That why you got brown fingers then G

G-man · Mar 26, 2010

nah thats cause i had an itch and the water was off

Matt DeVeants · May 8, 2010

I have a concrete drive and when I get oil on it I just get out the power washer and hose it down let it dry then go over it again, best dun when you have a couple of sunny days in a row.

Hope this helps.

Matt.

bigchap · May 8, 2010

grow some.what are you,man or mouse?

UKSPF · May 8, 2010

Never tried it but would'nt normal washing up liquid (in hot water) and a scrubbing brush work? washing up liquid is a surfactant and should separate oil. Or maybe washing powder. Or find a paint thats a very similar colour

pornstarmax · May 9, 2010

I went witht the "park it over the top and deny all knowlage" However misses just brought new car....

...Might susitute mine for hers and blame that....

sirleefellow · May 10, 2010

:mil90:

What about lifting the slabs,digging a wife size hole,fit said wife in hole and re-fit slabs.

Worked for me

pornstarmax · Aug 11, 2010

Perfect solution....

...Every landy owner should have a gravel drive

nathan5346 · Aug 11, 2010

paint the fookers

Boris113 · Aug 12, 2010

I found white spirit and a scrubbing brush works well on concrete. After emptying a litre of used engine oil on my carpet at uni we rubbed a load of showergel on it and left it for a few days...looked good as new so that might work on slabs too

Harry

Ryan Weston · Aug 12, 2010

Hi max,

Give this stuff go.... Loctite 7061 - Full - Henkel

bit on the pricey side but will deff get oil of your drive just spray away and watch it wash away like water....

.... also likes to remove nose hairs....

Ryan

OZAWOZA · Aug 12, 2010

dig up the drive and re-lay it... or if that's too much work, just dig up a small bit and bury yerself - anything else and yer ****ed!!!

buzzy bee · Aug 13, 2010

Have you usede the steam cleaner on it? That works on proper concrete, on our wash off bay.

rustyrhinos · Aug 14, 2010

OK....so how about EP90 from a regular road surface?

The Mad Hat Man · Aug 14, 2010

rustyrhinos said:
OK....so how about EP90 from a regular road surface?

keep parking somewhere different

.

Dead man walking How do you get oil of drive?

Well-Known Member

Well-Known Member

Active Member

Well-Known Member

BBQ king

Well-Known Member

BBQ king

New Member

New Member

New Member

Active Member

New Member

Active Member

Well-Known Member

Well-Known Member

New Member

Active Member

New Member

Well-Known Member

Well-Known Member

Similar threads