Dash Led

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

MRTs300

Active Member
Posts
225
Location
Somerset.
Hello.
So like everyone else I wanted to replace my standard lamps within my dash clock for nice bright led version. Seamed simply enough but having just tried fitting them they are a right pain.
They only went half way up the White lamp holder which I found odd. I turned the dash on and they were still green a quite dull. Seamed odd as the lamps are bright white.
So pull all the lamps back out again and the white holder was hot where the lamps would fit all the way. I took the engine temp guage out and have noticed inside the gauges the insert is green, so no matter what lamp I put in the dash is this dull green colour and the led lamps fit up the White holder but when they reach the green part won't go no further:(
So any ideas guys?.. Will post picture of the LEDs I got for it in abit.
I want bright white dash clocks but seams White the green inserts inside the gauges they will always be green?..
Anyone else had this issue?
Cheers
 
I put some similar ones in mine, the filters on the dials changed the colour a bit, but I think they looks good.

WP_20140426_23_07_35_Pro_zps128c7ff4.jpg
 
Is next thread gonna be "help my clocks are too bright I can't see where I'm going at night" they're coloured for a reason .........guess how I found out?;)
 
James where did you get your bulbs from.?! :)

EBay, just search for LED side light bulbs, I think ones without lights on the side would fit in the holders best. They are just normal white ones.

The clock is a different bulb and is green tinted so I left that.
 
I got a kit from EBay with a set of the correct led replacements for the bulbs in each dial. Much brighter, so I can now see them, but no where near too bright, just right. It was over a year ago so no way to link, but would definitely recommend. Turned my dash lights blue too.
 
Mine are Blue, be careful what led's you use, if they are too bright they will light up your face at night and you will look like a right tit.
 

Attachments

  • DSCF8483.JPG
    DSCF8483.JPG
    79.9 KB · Views: 276


Here are the lamps.

Those don't look right, the led's on the side will cause the bulb holder to heat up, they look way too bright as well.
Don't use led's designed for side lights, they are not the same thing and will be way too bright.
 
Mine are Blue, be careful what led's you use, if they are too bright they will light up your face at night and you will look like a right tit.

Dude, you put the red lights on the front instead of the back in that pic!

Those don't look right, the led's on the side will cause the bulb holder to heat up, they look way too bright as well.
Don't use led's designed for side lights, they are not the same thing and will be way too bright.

The ones I bought are perfect, not too bright at all, but they are the cheaper ones I think, more like these.
4x T10 W5W 501 Xenon White High Power SMD LED Interior Wedge Side Light Bulb 12V | eBay
 
I got similar LEDs for mine and had the same problem with the green insert.....soon sorted out with a drill.

The insert is plastic and drills quite easily put don't push as you will go through and bend the display.

Then you will find the LEDs also plug in further.
 
Those don't look right, the led's on the side will cause the bulb holder to heat up, they look way too bright as well.
Don't use led's designed for side lights, they are not the same thing and will be way too bright.

They were sold to me as dash lights but I can see what your saying. I noticed the holder was hot even after 5 mins. So anyone else got a different type?..I don't want to melt the holders. Lol
 
As above, I was just going to link to those, pretty sure that's the ones I used too. The ones with the multi led sections on each bulb seem OTT and may be crazy bright.
 
Back
Top